thinktool-max

Overview
Accessories
Comparisons
Specifications
FAQ
THINKCAR

THINKTOOL MAX

13 INCHES PROGRAMMING TOOL

Bigger, Faster, More Powerful

THINKCAR

13.3inches

THINKCAR

Heavy Duty

THINKCAR

Programming

MAIN FEATURES

Programming

More Powerful than Ever

THINKTOOL MAX, the most powerful modular programming diagnostic tool, introduces intelligent programming function available for AUDI,BMW,HYUNDAI,JAGUAR,KIA,LANDROVER,BENZ,NISSAN, PORSCHE,RENAULT,SEAT,SKODA,SUBARU,VW,SAICMG,MAXUS,TRUMPCHI,SPRINTER,HONDA. More to come!

No Data
THINKCAR

Exceptional Coverage

Support 12V and 24V vehicles

THINKTOOL MAX supports 220 car makes worldwide, both 12V & 24V passenger, commercial, hybrid vehicles, heavy duty trucks, etc

THINKCAR

Passenger cars

THINKCAR

Commercial cars

THINKCAR

Hybrid cars

THINKCAR

Heavy duties

THINKCAR

THINKCAR

THINKCAR

THINKTOOL MAX is equipped with a standard 16-PIN diagnostic box together with OBDI connector

THINKCAR

THINKTOOL MAX adopts the latest DoIP and CAN FD protocols as well as J2534, D-PDU, DoIP, ISO-15765, SAE-J1939, ISO-14229 UDS, SAE-J2411 Single Wire Can (GMLAN), ISO-11898-2, ISO-11898-3, SAE-J2819 (TP2.0), ISO-9141, ISO-14230, SAE-J2610 (Chrysler SCI), UART Echo Byte, SAE-J2809 (Honda Diag-H), SAE-J2740 (GM ALDL), SAE-J1567 (CCD BUS), Ford UBP, Nissan DDL UART with Clock, BMW DS2, BMW DS1, kwp128, SAE J1708, SAE-J1850 PWM (Ford SCP), SAE-J1850 VPW (GM Class2) protocols.

THINKCAR

Advanced Diagnostic Functions

Providing OE Level Diagnosis

THINKTOOL MAX supports full vehicle diagnostics, read&clear codes, live data stream, actuation test, special functions, 41 different maintenance reset functions and more.

THINKCAR
THINKCAR

Reading fault codes

THINKCAR

Clearing fault codes

THINKCAR

Live data stream

THINKCAR

Actuation test

THINKCAR

Special functions

41 different maintenance reset functions

THINKCAR

Dual range Wi-Fi Connection

Faster than Ever

THINKTOOL MAX supports dual range Wi-Fi connection. The tablet communicates with the diagnostic box through Wi-Fi, allowing technicians to quickly operate diagnostics, checking fault code and other functions .

THINKCAR
THINKCAR

DUAL WI-FI CONNECTION

THINKCAR
THINKCAR

CHECKING FAULT CODE

More efficient than ever

Intelligent Topology Module Mapping of CAN BUS

THINKTOOL MAX intelligent topology module mapping of CAN BUS with color coded module statues for a faster result.

THINKCAR
THINKCAR

Intelligent Modular Combination

THINKTOOL MAX equipped with four intelligent diagnostic modules, THINKEASY 2 Bluetooth Battery Tester, Video Scope , T-Wand 200, Scope Box. All modules connect to the tablet via Wi-Fi or USB cable, making the diagnostic easier and quicker.

Superior Hardware

8GB RAM, 256GB storage, 9300mAh rechargeable battery, IP65. With a vivid 13 megapixel back camera, 13.3 inches LED touch screen, brightness up to 800 nit, THINKTOOL MAX captures every detail, more superior than any other scanning tablets on the market.

THINKCAR
THINKCAR

13 megapixel back camera

THINKCAR

18600mAh battery

THINKCAR

brightness up to 800 nit

THINKCAR

8GB RAM, 256GB STORAGE

THINKCAR

13.3 INCH LED touch screen

THINKCAR

IP65

THINKCAR

Adas Calibrations Services

THINKTOOL MAX ADAS (Advanced Driver Assistance Systems) calibration provides OE level diagnostics and calibrations with an expansive coverage of vehicles with accuracy down to the millimeter.

THINKCAR

CUSTOMER SUPPORT SERVICE

THINKTOOL MAX Remote Diagnosis provides direct technical support to remotely access any Max tool in the field. Helping technicians fix problems quickly and accurately for better customer support.

Accessories

img

Comparisons

img

Specifications

Camera 13.0MP Rear
Battery 18600mAh/3.7V
ROM/RAM 256G/8G
PROCESSOR 2.0GHz | OCTA-Core
TEAMVIEWER Supported
Water Proof IP 65
Display Screen 13.3-Inch
ADAS Calibrations Supported
Operationg System Android 9.0
VW Guided Function Supported
Secure Gateway Access AUTHORIZED FCA ACCESS
Software Update ( HD) Purchase Separately
Topology Module Mapping Supported
Software Update ( Passenger) 2-Year Free Update

FAQ

Insufficient contact of VCI with vehicle OBD port

Please replug the VCI.

Unfix the firmware.

Click “settings” and then "firmware repair" icon to upgrade the firmware.

Bad contact of the VCI

Please reinsert the VCI and try again.

Problem with Bluetooth pairing.

Please cancel the Bluetooth pairing of the diagnostic VCI and re-use the software to automatically pair the VCI.

The diagnostic tablet is left unused for a long time and the battery runs out of power.

Boot by long-pressing the ON/OFF a after 2 hours charging.

Adapter failure.

Please confirm whether the adapter is properly connected to power supply, or the interface contact is in the right place.

No network on the diagnostic tablet.

Check if the diagnostic tablet is connected to good network.

Get prompted that the email address has been signed up.

1. Sign up a new account;2. Retrieve the password and sign in with the original account.

Fail to receive the verification code during sign-up.

1. Check if the email address is correct; 2. Resend a new verification code.

Username or password incorrect.

1. Check if the username or password is correct; 2. Reset your password.

Server failure.

Please try later due to server maintenance.

The device is not connected to Internet

Please confirm whether WiFi network is working normally or network connection is successful.

The serial number and activation code are entered incorrectly

Please check and confirm whether the serial number and activation code are correctly entered (12 digits for serial number and 8 digits for activation code).

Activation code is invalid

Please contact THINKCAR service team or regional sales.

Prompt that the configuration is empty

Please contact THINKCAR service team or regional sale.

When the software is upgraded, it prompts that it is not activated.

The diagnostic VCI may not be activated during registration. Please use the serial number and activation code in the password envelope to activate the device. The operation steps are as follows: Click [Settings]-[VCI Activation], and enter the correct serial number and activation code in the interface, and click [Activate]. If you have any questions, please contact after-sales customer service.

The device is not connected to Internet

Please confirm whether WiFi network is working normally or network connection is successful.

Insufficient storage space

Please uninstall irrelevant applications: select and delete uncommon software in “Software cleaning module” under “Settings” menu.

Server problem

Server under maintenance. Please try again later.

Poor contact of vehicle OBD internal circuit

Please check if OBD pins are all in good conditions.

Vehicle battery heavily loss of electricity

Please recharge of replace the battery.

VCI damage

Please provide proof video to THINKCAR service team for processing.

How to save power?

1）Please sleep the screen，if the tablet isn’t been used. 2)Reduce screen standby time by setting. 3)Reduce the screen brightness by setting.

Where can I purchase a THINKCAR device?

Please contact your local dealers listed in www.thinkcar.com to buy THINKCAR tools.

Can I dis-active my diagnostic tools?

Cancellation of registration is not allowed.If there are any special circumstances, the dealer will submit the SN and application reason to the company to apply, and the dealer will assume that the customer complaint caused by the cancellation of the registration will be assumed by the dealer.

Can the account password be changed?

Modification is not allowed, customers are advised to modify by themselves by retrieving the password