thinkcar-t-wand-900
THINKCAR T-Wand 900
Full Vehicle Diagnostic With Intelligent TPMS Sensor Activation, Programming and Relearn Function!
Build-in TPMS
Full System Scan
Lifetime Free Update
28 Maintenance
Extensive Module Support
Build-in TPMS with Full TPMS Service
THINKCAR T-Wand 900 is an intelligent TPMS service tool with build-in TPMS module，integrated full TPMS sensor activation, programming and relearn function. The equipped 5 TPMS S1 sensors can replace OE 315 MHz and 433 MHz frequency sensors.
Sensor Activation
To read sensor ID, tire pressure, frequency, temperature and sensor battery.
Sensor Progremming
T-Wand supports three different programming methord, copy, automatic create ID, Manual Create.
Sensor - Relearn Function
To write the newly programmed sensor IDs into the ECU for sensor recognition
OE-Level Full Vehicle Diagnostic Full Software Lifetime Free Update
THINKCAR T-Wand 900 is also a full system diagnostic tool support 99% vehicle to read and clear fault codes, to read, save or compare live data stream, to do 28 different kinds of maintenance and resets. All manufacturer software and maintenance software lifetime free update.
Integrated 28 Commonly Used Maintenance Special Function
| RESET ADBLUE | RESET BRAKE | RESET INJEC | RESET STOP/START |
| RESET AFS | RESET COOLANT | RESET LANGUAGE | RESET SUN |
| RESET AIRBAG | RESET DPF | RESET NOXSENSOR | RESET SUS |
| RESET AIRFUEL | RESET EGR | RESET ODO | RESET TPMS |
| RESET BLEED | RESET ETS | RESET OIL | RESET TRANSPORT |
| RESET BMS | RESET GEAR | RESET SAS | RESET TYRE |
| RESET BOX | RESET IMMO | RESET SEAT | RESET WINDOW |
Extended Module Support
BATTERY TESTER
Offers full battery check services
Innovative Battery Testing, Leave Traditional Way in the Past!
Integrated with ThinkTool HD screen for clearer display
High-precision data monitoring, with more accurate results
Support detecting battery voltage, resistance, service life, current and etc
THINKTOOL Scope Box
Check vehicle circuit related failure
Useful, Professional, with Easy Operation
100M bandwidth,4 channels
Up to 1GSa/s of sampling rate,with 50Mpts record length
THINKTOOL Printer
Support diagnostic report print service
Quick Print Diagnostic Reports Anytime and Anywhere!
3.1-inch (80mm) paper width, 1.2-inch/s 30mm/s) fast printing
Intelligent notification for refilling paper
Ultra-thick thermal coating, with contents retained for 10 years
Work with Module Dock as a wireless printer
THINKTOOL Video Scope
Allow technicians to check faults in narrow and dark space
See Deeper & Clearer, with More Details in Narrow Spaces!
1280*720 high definition
59-inch (150cm) super long hardwired coil
6 bright LED auxiliary lights
Water, oil and corrosion resistant, IP67 rated with alkali resistance
THINKTOOL Work Light
Offer lighting assistant service
Ultra-High Brightness LED Worklight!
3-level brightness adjustment
144 high-brightness LED lights
COB light source, 25000K white-light, long range illumination
Long life expectancy, up to 10,000 hours
Work with Module Dock
THINKTOOL Thermal Imager
Scan and capture vehicle temperature
Identify Faults with Massive Data Comparison!
320*240 ultra-high pixels, easy to view details
32.126℉ (0.07℃) thermal sensitivity
Massive automotive heat maps for fault comparison
Remarks: Please buy the modules in ThinkStore or local authorized distributors.
Specifications
Operating System Android 10
Camera 13MP Rear
Screen Size 7-inch
ROM/RAM 64G/2G
Battery 6000mAh/3.8V
Accessories
Comparisons
Specifications
FAQ
Insufficient contact of VCI with vehicle OBD port
Please replug the VCI.
Unfix the firmware.
Click “settings” and then "firmware repair" icon to upgrade the firmware.
Bad contact of the VCI
Please reinsert the VCI and try again.
Problem with Bluetooth pairing.
Please cancel the Bluetooth pairing of the diagnostic VCI and re-use the software to automatically pair the VCI.
The diagnostic tablet is left unused for a long time and the battery runs out of power.
Boot by long-pressing the ON/OFF button after 2 hours charging.
Adapter failure.
Please confirm whether the adapter is properly connected to power supply, or the interface contact is in the right place.
No network on the diagnostic tablet.
Check if the diagnostic tablet is connected to good network.
Get prompted that the email address has been signed up.
1. Sign up a new account;2. Retrieve the password and sign in with the original account.
Fail to receive the verification code during sign-up.
1. Check if the email address is correct;
2. Resend a new verification code.
Username or password incorrect.
1. Check if the username or password is correct; 2. Reset your password.
Server failure.
Please try later due to server maintenance.
The device is not connected to Internet
Please confirm whether WiFi network is working normally or network connection is successful.
The serial number and activation code are entered incorrectly
Please check and confirm whether the serial number and activation code are correctly entered (12 digits for serial number and 8 digits for activation code).
Activation code is invalid
Please contact THINKCAR service team or regional sales.
Prompt that the configuration is empty
Please contact THINKCAR service team or regional sale.
When the software is upgraded, it prompts that it is not activated.
The diagnostic VCI may not be activated during registration. Please use the serial number and activation code in the password envelope to activate the device. The operation steps are as follows: Click [Settings]-[VCI Activation], and enter the correct serial number and activation code in the interface, and click [Activate]. If you have any questions, please contact after-sales customer service.
The device is not connected to Internet
Please confirm whether WiFi network is working normally or network connection is successful.
Insufficient storage space
Please uninstall irrelevant applications: select and delete uncommon software in “Software cleaning module” under “Settings” menu.
Server problem
Server under maintenance. Please try again later.
Poor contact of vehicle OBD internal circuit
Please check if OBD pins are all in good conditions.
Vehicle battery heavily loss of electricity
Please recharge of replace the battery.
VCI damage
Please provide proof video to THINKCAR service team for processing.How to save power?
1）Please sleep the screen，if the tablet isn’t been used. 2)Reduce screen standby time by setting. 3)Reduce the screen brightness by setting.
Where can I purchase a THINKCAR device?
Please contact your local dealers listed in www.thinkcar.com to buy THINKCAR tools.
Can I dis-active my diagnostic tools?
Cancellation of registration is not allowed.If there are any special circumstances, the dealer will submit the SN and application reason to the company to apply, and the dealer will assume that the customer complaint caused by the cancellation of the registration will be assumed by the dealer.
Can the account password be changed?
Modification is not allowed, customers are advised to modify by themselves by retrieving the password
