thinkcar-professional-lift-selection

Overview
Accessories
Comparisons
Specifications
FAQ

THINKCAR Professional Lift Selection

THINKCAR TVL Series Introduce

THINKCAR TVL Series are including scissor lifts, post lifts and electric vehicle lifts, all together 9 different kinds, which are mainly used in automobile repair and maintenance, tire positioning, battery pack disassembly and assembly, etc.

Advantages

THINKCAR Lift is using high-quality Q235 hot-rolled plates, the 4-ton Two-post lift adopts a thickness of 5mm+ steel materials, while other brands are mainly using 4.75mm thick steel or even less. The scissor lift scissor arms all use Q345 manganese steel solid scissor arms.

All oil cylinder seals adopt double-channel welding sealing technology, and the piston seals adopt high-quality polyurethane sealing rings for double-channel sealing.

THINKCAR Two-posts lift series are equipped with 2+3-section supporting arms as standard, which increases the range of movement and is applicable to a wider range of vehicle models.

THINKCAR Lift is using anti-falling chain wheel, reliable and safety.

THINKCAR Lift has 8 pieces chains and 115 sections, while other brands on the market only supply 7 pieces chains.

Steel wire rope with steel core diameter up to 9mm+, while other brands on the market less than 8mm.

The oil cylinder diameter is 40MM, while other brands on the market is 38MM or less.

The sliding table is using 6MM steel plate, while other brands on the market are mainly 5MM or less.

Scissors Lift

THINKCAR TVL 635 Small Scissors Lift
features
  • ·Underground installation, saving work space
  • ·Equipped with a full set of imported oil cylinders and ball valve components,with reliable quality.
  • ·The platform length is adjustable and suitable for different models.
  • ·Hydraulic volume synchronized cylinder, platform operation is synchronous and stable.
  • ·24V limit control box, safe, simple and convenient.
  • ·Hydraulic lock and mechanical double-tooth safety claw, double insurance, safe and reliable.
  • ·Overload redundancy design, passed 120% dynamic loading and 150% express loading tests.
Specifications
Rated load
3500kg
Lifting height
2130mm
Initial height
330mm
Lifting time
≤55s
Lowering time
≥20s
Platform length
Standard 1550-1740mm,double pull 1650-2040mm
Platform width
550mm
Power
2.2kw
Voltage
AC 400V or 230V±5% 50Hz
Hydraulic Oil
12L( Winter: N32# Summer: N46# )
Net weight
Standard 696kg, double pull-out 722kg
Working Temperature
5-40℃
Air Pressure
0.6-0.8Mpa
THINKCAR TVL 735 Ultra-thin Small Twin Scissors Lift
features
  • ·Ultra-thin structure, no need for construction pits, easy installation.
  • ·Equipped with a full set of imported oil cylinders and ball valve components,with reliable quality.
  • ·The approach bridge serves as an extension platform and is suitable for different vehicle types.
  • ·Hydraulic volume synchronous cylinder, the platform operates synchronously and stably.
  • ·24V limit control box, safe, simple and convenient.
  • ·Humanized safety design, anti-presser foot setting and pneumatic safety lock.
  • ·Using manganese plate support arm and aluminum motor pump station, strong power.
  • ·Overload redundancy design, passed 120% dynamic loading and 150% express loading tests.
Specifications
Rated load
3500kg
Lifting height
1850mm
Initial height
115 mm
Lifting time
≤50s
Lowering time
≥20s
Platform length
1475-2000mm
Platform width
650mm
Power
2.2kw
Voltage
AC 400V or 230V±5% 50Hz
Hydraulic Oil
12L( Winter: N32# Summer: N46# )
Net weight
870kg
Working Temperature
5-40℃
Air Pressure
0.6-0.8Mpa
THINKCAR TVL 840 Large Scissors Lift
features
  • ·The underground installation saving working space.
  • ·Independent control box, low voltage control, good safety performance.
  • ·Hydraulic volume synchronized cylinder, the platform operates synchronously and stably.
  • ·Hydraulic lock and mechanical double-tooth safety claw, double insurance, safe and reliable.
  • ·Hydraulic failure and overload safety valve protection.
  • ·Adopt oil-free and super wear-resistant material sliding block.
  • ·Equipped with high-quality hydraulic and electrical components from Italy, Germany, Japan, etc.
  • ·Using manganese plate support arm and aluminum motor pump station, strong power.
  • ·The scissors can be pulled out, suitable for extended long vehicle models.
  • ·Integral base, strong horizontal adjustment ability, precise and adjustable precision, especially suitable for four-wheel alignment detection.
Specifications
Rated load
4000kg
Lifting height
1850mm
Initial height
330 mm
Lifting time
≤50s
Lowering time
≥20s
Platform length
4500mm
Platform width
630mm
Power
2.2kw
Voltage
AC 400V or 230V±5% 50Hz
Hydraulic Oil
20L( Winter: N32# Summer: N46# )
Net weight
2050kg
Working Temperature
5-40℃
Air Pressure
0.6-0.8Mpa
THINKCAR TVL 940 Ultra-thin Large Scissors Lift
features
The TVL 940 Ultra-thin Large Scissors lift is space-saving, safety and reliable, with good horizontal adjustment ability for precisely adjusting horizontal accuracy, easy to operate.
  • ·Ultra-thin, easy installation, No pit construction required.
  • ·Independent control box, low voltage control, good safety performance.
  • ·Double cylinder design and synchronized cylinders ensure that the platform operates synchronously and stably.
  • ·Hydraulic lock and mechanical double-tooth safety claw, double insurance, safe and reliable.
  • ·With hydraulic failure and overload safety valve protection.
  • ·Equipped with high-quality hydraulic and electrical components from Italy, Germany, Japan, etc.
  • ·Using manganese plate support arm and aluminum motor pump station, strong power.
  • ·Integral base, strong horizontal adjustment ability, precise and adjustable precision, especially suitable for four-wheel alignment detection.
Specifications
Rated load
4000kg
Lifting height
1850mm
Initial height
215 mm
Lifting time
≤60s
Lowering time
≥20s
Platform length
4500mm
Platform width
660mm
Power
2.2kw
Voltage
AC 400V or 230V±5% 50Hz
Hydraulic Oil
20L( Winter: N32# Summer: N46# )
Net weight
2170kg
Working Temperature
5-40℃
Air Pressure
0.6-0.8Mpa

Post Series Lift

THINKCAR TVL 240 Two-post Lift
features
  • ·Two-side manual unlocking.
  • ·Steel wire rope balancing system forces the two slides to move synchronously, effectively preventing the vehicle from tilting.
  • ·The oil cylinder 100% passed the pressure holding test, dual hydraulic cylinders, high-strength chain drive system, smooth lifting and lowering.
  • ·Hydraulic lock and mechanical double-tooth safety claw, double insurance, safe and reliable.
  • ·High-quality power unit, safe and reliable operation.
  • ·Passed 120% dynamic loading test and 150% express loading test.
  • ·Comply with CE certification.
  • ·The slider is detachable and easy to replace.
  • ·The cable and oil pipes are fully covered.
Specifications
Rated load
4000kg
Lifting height
1800mm
Initial height
100 mm
Lifting time
≤50s
Lowering time
≥40s
Power
2.2kw
Voltage
220V/380V
Hydraulic Oil
9L( Winter: N32# Summer: N46# )
Net weight
600kg
Working Temperature
5-40℃
THINKCAR TVL 340 Clear Floor Two Post Lift
features
  • ·two sides manual unlocking.
  • ·Steel wire rope balancing system forces the two slides to move synchronously, effectively preventing the vehicle from tilting.
  • ·The oil cylinder 100% passed the pressure holding test, dual hydraulic cylinders, high-strength chain drive system, smooth lifting and lowering.
  • ·Hydraulic lock and mechanical double-tooth safety claw, double insurance, safe and reliable.
  • ·High-quality power unit, safe and reliable operation.
  • ·Passed 120% dynamic loading test and 150% express loading test.
  • ·Comply with CE certification.
  • ·The slider is detachable and easy to replace.
  • ·The cable and oil pipes are fully covered.
Specifications
Rated load
4000kg
Lifting height
1800mm
Initial height
100 mm
Lifting time
≤50s
Lowering time
≥40s
Power
2.2kw
Voltage
220V/380V
Hydraulic Oil
9L( Winter: N32# Summer: N46# )
Net weight
665kg
Working Temperature
5-40℃
THINKCAR TVL 440 Four-post Lift
features
  • ·Pneumatic synchronous unlocking.
  • ·Pillar design, easy to install.
  • ·The platform is made of bent steel plates and the beams are made of square tubes.
  • ·The cylinder adopts front fixation style to eliminate the risk of cylinder breakage.
  • ·The platform spacing is adjustable to adapt to vehicles with different tire spacing.
  • ·Cylinder 100% pressure holding test.
  • ·CE certificate.
  • ·The slider is detachable and easy to replace.
  • ·The cable and oil pipes are fully covered.
Specifications
Rated load
4000kg
Lifting height
1700mm+400mm
Initial height
180 mm
Lifting time
≤50s
Lowering time
≥40s
Platform length
4500mm
Platform width
488mm
Power
2.2kw
Voltage
220V/380V
Hydraulic Oil
10L( Winter: N32# Summer: N46# )
Net weight
1200kg
Working Temperature
5-40℃
Air Pressure
0.6-0.8Mpa
THINKCAR TVL 450 Four-post Lift
features
  • ·Pneumatic synchronous unlocking.
  • ·Pillar design, easy to install.
  • ·The platform is made of bent steel plates and the beams are made of square tubes.
  • ·The cylinder adopts front fixation style to eliminate the risk of cylinder breakage.
  • ·The platform spacing is adjustable to adapt to vehicles with different tire spacing.
  • ·Cylinder 100% pressure holding test.
Specifications
Rated load
5000kg
Lifting height
1700mm+400mm
Initial height
180 mm
Lifting time
≤50s
Lowering time
≥40s
Platform length
5000mm
Platform width
500mm
Power
2.2kw
Voltage
220V/380V
Hydraulic Oil
10L( Winter: N32# Summer: N46# )
Net weight
1500kg
Working Temperature
5-40℃
Air Pressure
0.6-0.8Mpa

Electric Vehicle Lift

THINKCAR TVL 515 Electric Vehicle Battery Pack Lift
features
  • ·Free installation, maintenance-free, easy to operate.
  • ·Equipped with 2 swivel casters for easy movement.
  • ·Electro-hydraulic, can rise quickly and slowly, fall at a uniform speed, safe and stable.
  • ·7° tilt design, suitable for disassembly and installation of battery packs in non-horizontal positions.
  • ·Maximum loading capacity up to 1.5 tons, maximum lifting height 1.75m.
Specifications
Rated load
1500kg
Lifting height
1750mm
Initial height
1130 mm
Lifting time
≤40s
Lowering time
≥40s
Platform length
1250mm
Platform width
795mm
Power
2.2kw
Voltage
220V/380V
Hydraulic Oil
7L( Winter: N32# Summer: N46# )
Net weight
300kg
Working Temperature
5-40℃

Accessories

No Data

Comparisons

img

Specifications

No Data

FAQ

Insufficient contact of VCI with vehicle OBD port

Please replug the VCI.

Unfix the firmware.

Click “settings” and then "firmware repair" icon to upgrade the firmware.

Bad contact of the VCI

Please reinsert the VCI and try again.

Problem with Bluetooth pairing.

Please cancel the Bluetooth pairing of the diagnostic VCI and re-use the software to automatically pair the VCI.

The diagnostic tablet is left unused for a long time and the battery runs out of power.

Boot by long-pressing the ON/OFF button after 2 hours charging.

Adapter failure.

Please confirm whether the adapter is properly connected to power supply, or the interface contact is in the right place.

No network on the diagnostic tablet.

Check if the diagnostic tablet is connected to good network.

Get prompted that the email address has been signed up.

1. Sign up a new account;2. Retrieve the password and sign in with the original account.

Fail to receive the verification code during sign-up.

1. Check if the email address is correct;

2. Resend a new verification code.

Username or password incorrect.

1. Check if the username or password is correct; 2. Reset your password.

Server failure.

Please try later due to server maintenance.

The device is not connected to Internet

Please confirm whether WiFi network is working normally or network connection is successful.

The serial number and activation code are entered incorrectly

Please check and confirm whether the serial number and activation code are correctly entered (12 digits for serial number and 8 digits for activation code).

Activation code is invalid

Please contact THINKCAR service team or regional sales.

Prompt that the configuration is empty

Please contact THINKCAR service team or regional sale.

When the software is upgraded, it prompts that it is not activated.

The diagnostic VCI may not be activated during registration. Please use the serial number and activation code in the password envelope to activate the device. The operation steps are as follows: Click [Settings]-[VCI Activation], and enter the correct serial number and activation code in the interface, and click [Activate]. If you have any questions, please contact after-sales customer service.

The device is not connected to Internet

Please confirm whether WiFi network is working normally or network connection is successful.

Insufficient storage space

Please uninstall irrelevant applications: select and delete uncommon software in “Software cleaning module” under “Settings” menu.

Server problem

Server under maintenance. Please try again later.

Poor contact of vehicle OBD internal circuit

Please check if OBD pins are all in good conditions.

Vehicle battery heavily loss of electricity

Please recharge of replace the battery.

VCI damage

Please provide proof video to THINKCAR service team for processing.

How to save power?

1）Please sleep the screen，if the tablet isn’t been used. 2)Reduce screen standby time by setting. 3)Reduce the screen brightness by setting.

Where can I purchase a THINKCAR device?

Please contact your local dealers listed in www.thinkcar.com to buy THINKCAR tools.

Can I dis-active my diagnostic tools?

Cancellation of registration is not allowed.If there are any special circumstances, the dealer will submit the SN and application reason to the company to apply, and the dealer will assume that the customer complaint caused by the cancellation of the registration will be assumed by the dealer.

Can the account password be changed?

Modification is not allowed, customers are advised to modify by themselves by retrieving the password